|
|
|
|
|
|
O-rings - Exhaust
|
|
|
Replacement black Viton Exhaust O-rings for CR125 O-ring manifolds, CR80 O-ring manifolds, Maxter exhaust headers and spacers, and Pavesi O-ring manifolds. Under Special Instructions, you must write in which engine you are purchasing the exhaust O-rings for.
|
|
|
|
|
|
|
|
|
|
|
94601-15000 - Circlips
|
Our Price: $1.99
|
|
|
Circlips - sold as a pair , for use on HRC RS Piston and Honda Stock Moto CR125
|
|
|
|
|
|
|
|
|
|
|
CW14
|
|
Our Price: $2.00
|
|
|
14mm Circlip - Pair - For use in engines that use a 14mm circlip, such as the Honda CR80 or CR85. We sell this one for the piston wrist pin clips. This product is mfg by Wiseco.
|
|
|
|
|
|
|
|
|
|
|
CR125 Base Gasket - aftermarket
|
|
Our Price: $2.99
|
|
|
CR125 Base Gasket - thickness options - 0.0015", 0.005", 0.010", 0.015", 0.020"
|
|
|
|
|
|
|
|
|
|
|
Gasket, Reed Cage 1999 CR125
|
|
Our Price: $4.75
|
|
|
OEM Honda CR125 Reed Cage Gasket. Always inspect gaskets when removing the reed cage or replacing the reeds. When you install this gasket, the two black rubber strips on the gasket face the cases.
|
|
|
|
|
|
|
|
|
|
|
91103-KZ4-B01 - Bearing
|
|
Our Price: $6.99
|
|
|
Bearing, Top End Wrist Pin # 91103-KZ4-B01 - For use on the Honda HRC RS Piston and the CR125 Piston
|
|
|
|
|
|
|
|
|
|
CDI Isolator - CR125
|
|
Our Price: $7.49
|
|
|
Honda CR125 rubber sleeve for CDI module. 30401-KZ3-J10 . Part works with the SwedeTech CDI Holder.
|
|
|
|
|
|
|
|
|
|
|
CR125 Kick Starter Plug
|
|
Our Price: $9.99
|
|
|
Kick starter plug for your CR125 kit engines.
|
|
|
|
|
|
|
|
|
|
|
CR125 Base Gasket - 99
|
|
Our Price: $9.99
|
|
|
1999 CR125 Honda OEM Base Gasket, 1999
|
|
|
|
|
|
|
|
|
|
90 Degree Hose 1/2
|
|
Our Price: $9.99
|
|
|
90 Degree water hose to fit the Honda CR125 OEM head outlets. Order two plus the 19069-KA4-730 for the Stock Moto application. The proper hose clamps are Hose Clamp - 25mm.
Long side measures 100mm ( 4" )
Short end measures 30mm ( 1.25" )
I.D. measures 13mm ( 1/2" )
|
|
|
|
