|
|
|
|
|
|
Plug Wire
|
Our Price: $1.00
|
|
|
7mm replacement spark plug wire used on CR125, CR80, CR250, and many other engine applications were the coil wire and plug cap can be replaced.
Sold Per foot - 1 qty = 1 foot length. Qty's greater than 1 will be shipped uncut. For example, if you order 2, we will send 1 pc at 2' in length.
|
|
|
|
|
|
|
|
|
|
Hose Clamp - 25mm
|
|
Our Price: $1.99
|
|
|
Hose Clamp sizes from 16mm - 25mm. Used on most kart water hose applications. This is the hose clamp SwedeTech recommends on our engines. The clamp is a good quality and it has the thin clamp area to properly fit the hose fittings on most go kart applications.
|
|
|
|
|
|
|
|
|
|
Hose Clamp - 60mm
|
|
Our Price: $2.99
|
|
|
Hose Clamp sizes from 40mm - 60mm. Used on CR125 Intake manifold applications. This is the hose clamp SwedeTech recommends on our engines. The clamp is a good quality and it has the thin clamp area to properly fit the intake manifolds fittings on CR125 engine. This is the same clamp used on the SwedeTech Straight Manifold as well as Stock Moto. Stop losing laps from the wrong hose clamp.
|
|
|
|
|
|
|
|
|
|
O ring - Inner
|
|
Our Price: $4.50
|
|
|
Viton O ring for engines that utilize an o ring in the head or cylinder. If you are unsure of the proper application, call us.
|
|
|
|
|
|
|
|
|
|
|
O ring - outer
|
|
Our Price: $4.50
|
|
|
Viton O ring for engines that utilize an o ring in the head or cylinder. If you are unsure of the proper application, call us.
|
|
|
|
|
|
|
|
|
|
TBO5EMA
|
|
Our Price: $6.50
|
|
|
NGK Resistor Spark Plug Cap - TBO5EMA - SwedeTech recommends the plug cap for TM ICC, Maxter ICC, Pavesi ICC, Vortex ICC, CR125, CR80, CR250, Iame, Parilla, Leopard, Puma, HPV, etc.
|
|
|
|
|
|
|
|
|
|
|
BR10EG
|
|
Our Price: $6.59
|
|
|
NGK Spark Plug - BR10EG
|
|
|
|
|
|
|
|
|
|
Ground Strap - SPI
|
|
Our Price: $10.99
|
|
|
Ground Strap for the CR125, CR80, and CR250 coil mount made by SwedeTech. Ground strap can be used on other engines as well.
|
|
|
|
|
|
|
|
|
|
Fuel Pump mount
|
|
Our Price: $16.99
|
|
|
18355-KS6-000 -- Rubber Isolator used for fuel pump mounts on SwedeTech CR125 and other engine applications. Also used as an exhaust mount for the OEM application
|
|
|
|
|
|
|
|
|
|
PWM / PWK Cable Holder
|
|
Our Price: $60.00
|
|
|
This is a spring loaded cable holder that is designed for use with a Keihin PWM or Keihin PWK carburetor.
The benefits of using this cable holder are...
-Spring loaded feature applies constant pressure on the needle clip
-Allows for the placement of a washer, to achieve a ½ postion on the clip
-The needle clip tends to break without this unit
|
|
|
|
