Join our mailing list!




 
Welcome.

Welcome to www.ShopSwedeTech.com . SwedeTech Racing Engines Direct to consumers shopping cart.
SwedeTech Racing Engines is a full labor service and two-stroke parts supplier. If you are unable to find answers or parts on our website, please send us an email so we can address your questions properly.

Please look around our store and if you are having difficulty finding a particular part, please send us an email.  SwedeTech Racing Engines continually adds to our online shopping cart to better service our customers.  We value and appreciate all honest feedback.


SKUSA Timing Plate - Stock Moto
Our Price: $13.00

SKUSA Mandated ignition timing plate for the Stock Moto classes, which include S1, S2, S3, S4, and S5.

Below is the information from SKUSA

This optional Timing plate was developed to allow competitors to set their timing to stock settings, as we recently required for 2010. While the reinstallation of an unmodified stock stamped steel plate is also permitted, many have been removed or modified - which makes them unacceptable. As the plate is not available from Honda separately, the only way to obtain one is to purchase a complete ignition. The SKUSA Timing Plate was developed to meet this requirement. Note that by developing this solution, even modified aluminum stator base plates may continue to be used.

Installation is simple: install the new plate in place of the stock plate with the standard 6 x 18 hex bolt or full thread replacement. Make sure the plate locates on the cast dowel and hold in position with a 4 x 10 screw (the stock 4 x 8 will also work if you have retained it).

Note that no modifications to the stator hold down bolts or to the SKUSA plate is permitted. No other modification to any of the ignition components that changes static timing is permitted beyond what the stock plate or SKUSA plate allows. This also applies to the rotor, crankshaft, keys and keyways.

You can also view the posted installation video.
Race Air 3000
Our Price: $349.99

All-in-one digital weather station, updated with the same great sensors in the RaceAir™ Pro. It features automatic air sampling and an internal fan control to provide highly accurate results.

Provides weather data and calculated values to assist in E.T. prediction and tuning. Unit can also be upgraded to the RaceAir Pro.  Now Compatible with Crew Chief Pro 5.0 Software.

Weather Variables; Temperature, Humidity, Barometric Pressure, Standard Correction Factor, Density Altitude, Air Density Ratio, Dry Barometer, Dew Point, Wet Bulb, Vapor Pressure, Water Vapor (grains), and Pressure Altitude

This is the weather station unit used by SwedeTech Racing Engines for tuning our national winning engines.  If you are trying to create your own jet chart or track your engine performance, this is a must have.
CR125 Engine Mount - Lightest on the market
SwedeTech CR125 Aluminum Mount
Our Price: $229.00

Finally a mount that is made correctly for your CR125 engine.  The SwedeTech CR125 Engine mount offers the following features.
- Anodized 6061 T6 Aluminum Alloy Engine mount
- 7/10th's lb lighter than any other mount we have weighed
- Chassis clamps designed for either 1 bolt or 2 bolt per clamp option
- Chassis clamps serrated to minimize slippage
- Adjust the engine from left to right for proper clearance ( approximately 8mm, left to right )
- Engine Mount sits the rear of the engine up to 1" lower than other mounts
- Hardware securing engine to the mount is the proper sizes to match the Honda Cases
- Proper machining from front to back, engine will not be twisted when mounted to a straight frame.
- Proper radius on frame contact point
- Left side of rear engine mount machined to allow for chassis cross tubing weld clearance
- Lightening Holes through out the mount
- Stress Points taken into consideration during the design and machining process

This mount may cost a little more than some of the other mounts on the market.  Buy the right mount the first time.  Save money in the long run.

This is only a reference, for some chassis below.  Contact your chassis Supplier for proper frame rail sizes.  
CRG, GP, Zanardi, Maranello - 3290
Birel - 3292 or 3092
TonyKart, Kosmic, FA - 3092 or 3292



New Products

Fuel Line Clamp for 1/4" hose
Our Price: $2.34
Zep 2000 Lubricant
Our Price: $18.45
Rotax Max FR 125 - Sr Package
Our Price: $3,710.65
Zep 2000 Lubricant - case
Motul MoCOOL Radiator Fluid 500 ML bottle - 6 pac
Our Price: $109.99